Product SiteDocumentation Site

13.5. Configuring STONITH

Note

Higher-level configuration shells include functionality to simplify the process below, particularly the step for deciding which parameters are required. However since this document deals only with core components, you should refer to the STONITH section of the Clusters from Scratch guide for those details.
  1. Find the correct driver:
    # stonith_admin --list-installed
  2. Find the required parameters associated with the device (replacing $AGENT_NAME with the name obtained from the previous step):
    # stonith_admin --metadata --agent $AGENT_NAME
  3. Create a file called stonith.xml containing a primitive resource with a class of stonith, a type equal to the agent name obtained earlier, and a parameter for each of the values returned in the previous step.
  4. If the device does not know how to fence nodes based on their uname, you may also need to set the special pcmk_host_map parameter. See man stonithd for details.
  5. If the device does not support the list command, you may also need to set the special pcmk_host_list and/or pcmk_host_check parameters. See man stonithd for details.
  6. If the device does not expect the victim to be specified with the port parameter, you may also need to set the special pcmk_host_argument parameter. See man stonithd for details.
  7. Upload it into the CIB using cibadmin:
    # cibadmin -C -o resources --xml-file stonith.xml
  8. Set stonith-enabled to true:
    # crm_attribute -t crm_config -n stonith-enabled -v true
  9. Once the stonith resource is running, you can test it by executing the following (although you might want to stop the cluster on that machine first):
    # stonith_admin --reboot nodename

13.5.1. Example STONITH Configuration

Assume we have an chassis containing four nodes and an IPMI device active on 192.0.2.1. We would choose the fence_ipmilan driver, and obtain the following list of parameters:

Example 13.1. Obtaining a list of STONITH Parameters

# stonith_admin --metadata -a fence_ipmilan
<resource-agent name="fence_ipmilan" shortdesc="Fence agent for IPMI over LAN">
  <symlink name="fence_ilo3" shortdesc="Fence agent for HP iLO3"/>
  <symlink name="fence_ilo4" shortdesc="Fence agent for HP iLO4"/>
  <symlink name="fence_idrac" shortdesc="Fence agent for Dell iDRAC"/>
  <symlink name="fence_imm" shortdesc="Fence agent for IBM Integrated Management Module"/>
  <longdesc>
  </longdesc>
  <vendor-url>
  </vendor-url>
  <parameters>
    <parameter name="auth" unique="0" required="0">
      <getopt mixed="-A"/>
      <content type="string"/>
      <shortdesc>
      </shortdesc>
    </parameter>
    <parameter name="ipaddr" unique="0" required="1">
      <getopt mixed="-a"/>
      <content type="string"/>
      <shortdesc>
      </shortdesc>
    </parameter>
    <parameter name="passwd" unique="0" required="0">
      <getopt mixed="-p"/>
      <content type="string"/>
      <shortdesc>
      </shortdesc>
    </parameter>
    <parameter name="passwd_script" unique="0" required="0">
      <getopt mixed="-S"/>
      <content type="string"/>
      <shortdesc>
      </shortdesc>
    </parameter>
    <parameter name="lanplus" unique="0" required="0">
      <getopt mixed="-P"/>
      <content type="boolean"/>
      <shortdesc>
      </shortdesc>
    </parameter>
    <parameter name="login" unique="0" required="0">
      <getopt mixed="-l"/>
      <content type="string"/>
      <shortdesc>
      </shortdesc>
    </parameter>
    <parameter name="action" unique="0" required="0">
      <getopt mixed="-o"/>
      <content type="string" default="reboot"/>
      <shortdesc>
      </shortdesc>
    </parameter>
    <parameter name="timeout" unique="0" required="0">
      <getopt mixed="-t"/>
      <content type="string"/>
      <shortdesc>
      </shortdesc>
    </parameter>
    <parameter name="cipher" unique="0" required="0">
      <getopt mixed="-C"/>
      <content type="string"/>
      <shortdesc>
      </shortdesc>
    </parameter>
    <parameter name="method" unique="0" required="0">
      <getopt mixed="-M"/>
      <content type="string" default="onoff"/>
      <shortdesc>
      </shortdesc>
    </parameter>
    <parameter name="power_wait" unique="0" required="0">
      <getopt mixed="-T"/>
      <content type="string" default="2"/>
      <shortdesc>
      </shortdesc>
    </parameter>
    <parameter name="delay" unique="0" required="0">
      <getopt mixed="-f"/>
      <content type="string"/>
      <shortdesc>
      </shortdesc>
    </parameter>
    <parameter name="privlvl" unique="0" required="0">
      <getopt mixed="-L"/>
      <content type="string"/>
      <shortdesc>
      </shortdesc>
    </parameter>
    <parameter name="verbose" unique="0" required="0">
      <getopt mixed="-v"/>
      <content type="boolean"/>
      <shortdesc>
      </shortdesc>
    </parameter>
  </parameters>
  <actions>
    <action name="on"/>
    <action name="off"/>
    <action name="reboot"/>
    <action name="status"/>
    <action name="diag"/>
    <action name="list"/>
    <action name="monitor"/>
    <action name="metadata"/>
    <action name="stop" timeout="20s"/>
    <action name="start" timeout="20s"/>
  </actions>
</resource-agent>

Based on that, we would create a STONITH resource fragment that might look like this:

Example 13.2. An IPMI-based STONITH Resource

<primitive id="Fencing" class="stonith" type="fence_ipmilan" >
  <instance_attributes id="Fencing-params" >
    <nvpair id="Fencing-passwd" name="passwd" value="testuser" />
    <nvpair id="Fencing-login" name="login" value="abc123" />
    <nvpair id="Fencing-ipaddr" name="ipaddr" value="192.0.2.1" />
    <nvpair id="Fencing-pcmk_host_list" name="pcmk_host_list" value="pcmk-1 pcmk-2" />
  </instance_attributes>
  <operations >
    <op id="Fencing-monitor-10m" interval="10m" name="monitor" timeout="300s" />
  </operations>
</primitive>

Finally, we need to enable STONITH:
# crm_attribute -t crm_config -n stonith-enabled -v true